DESCRIPTION AND OPERATION
Description
Operation
Gaskets and Seals
Transmission Service Identification
DIAGNOSIS AND TESTING
Transmission, Automatic, A4LD
Electrical
Electronic Control
Inputs
Outputs
Diagnosis Procedures
Quick Tests
KOEO On-Board Diagnostics
Special Test Modes
KOER On-Board Diagnostics
Special Test Mode
After On-Board Diagnostics
Pinpoint Tests
Resistance/Continuity Tests
Transmission Solenoids and Sensors Resistance Tests
Short to Ground and Solenoid Voltage Tests
Solenoid Diode Test
Transmission Solenoid Cycling and Drive Test Procedures
Mechanical
Accelerator Pedal Linkage and Operation
Fluid Leakage in Converter Area
Converter Leakage Check
Engine Vacuum Pressure
Engine Vacuum Procedure
Vacuum Pump Method
Vacuum Diaphragm Test, On-Vehicle
Vacuum Diaphragm Test, Off-Vehicle
Stall Test
Road Test
In Shop
Forward Clutch
Governor
Overdrive Servo
Overdrive Clutch (Applied in D, 2, 1 and R Ranges)
Reverse-High Clutch
Intermediate Servo
Low-Reverse Servo
Air Pressure Check Diagnosis
Hydraulic/Mechanical Electrical Diagnosis Guides
IN-VEHICLE SERVICE
General Reference
REMOVAL AND INSTALLATION
Automatic Transmission Fluid Checking and Adding Procedure
Transmission Fluid Condition Check
Transmission
Tools Required:
Removal
Installation
DISASSEMBLY AND ASSEMBLY
Transmission Assembly
Tools Required
Rear No. 4 Thrust Washer Clearance Selection, Non Clip Together Type
Intermediate Band Adjustment
Overdrive Band Adjustment
Extension Housing
Sub-Systems Disassembly
Disassembly and Assembly
Overdrive Clutch
Free Play Check
Disassembly
Assembly
Main Control Valve Body
CLEANING AND INSPECTION
Case
Transmission Fluid Lines
Converter End Play Check
SPECIFICATIONS
Specifications
SPECIAL SERVICE TOOLS/EQUIPMENT
Special Service Tools/Equipment
