General Reference

This information identifies components of the transmission that can be serviced in vehicle. Only the unique components/procedures not covered in Section 07-01A, Disassembly/Assembly are identified/covered here.

1. Cable Adjustments

   Refer to Section 07-05.

2. Band Adjustments
   • O/D Band
   • INT Band

   Refer to Band Adjustment under Disassembly and Assembly in this section.

3. Overdrive Servo
   • Piston Cover Seal (7D027)
   • Piston and Rod Assembly (7D021)

   Intermediate Servo

   • Piston Cover Seal (7D027)
   • Piston and Rod Assembly (7D021)

   Refer to Section 07-01A, Intermediate and Overdrive Servos under Disassembly and Assembly in this section.

4. Park/Neutral Position Switch (7A247)

   Refer to Park/Neutral Position Switch under Disassembly and Assembly in this section.

5. Diaphragm Assembly (7A377)
   • Seal (E853110-S)
   • Rod (7A380)

   Refer to Vacuum Diaphragm under Disassembly and Assembly in this section.

6. Oil Pan Gasket (7A191)

   Refer to Oil Pan under Disassembly and Assembly in this section.

7. Oil Screen Assembly (7A098)
   • O-Ring (7A469)

   Refer to Oil Screen under Disassembly and Assembly in this section.

8. Valve Body Assembly

   Refer to Main Control Valve Body under Disassembly and Assembly in this section.

   • Valves
   • Gaskets
   • Solenoids TCC (7F037), 3-4 (7M107)

   Refer to Sub-Systems in this section.

9. Reverse Servo
   • Gasket (7L173)
   • Piston and Rod Assembly (7D189)
   • Seals (7423)

   Refer to Disassembly and Assembly in this section.

10. Case Connector (7E449)

    Refer to Disassembly and Assembly in this section.

11. Shift Lever Assemblies
    • Inner Lever Downshift (7D261)
    • Outer Lever Manual Control (7A256)
    • Inner Manual Control (Rooster) (7A115)
    • "Z" Link (7E333)
    • Clip Rod Retaining (for "Z" Link) (E662312-S)
    • Manual Lever Oil Seal (In Case) (7B498)
    • Detent Spring (7E332)
    • Park Rod Assembly (7A232)
    • Kick Down Lever (7A394)
    • Outer Manual Lever Shaft Seal (386078-S)

    Refer to Disassembly and Assembly in this section.

12. Extension Housing with Guide Cup (7A039)
    • Park Pawl (7A441)
    • Return Spring (7D070)
    • Pawl Shaft (7D071)
    • Housing Gasket (7086)
    • Bushing (7A034)
    • Seal (7052)

    Refer to Disassembly and Assembly in this section.

13. Governor Assembly
    • Primary Valve (7C054)
    • Governor Body (7C063)
    • Spring (7A302)
    • Weight (7D324)
    • Counter Weight (7F124)

    Refer to Disassembly and Assembly in this section.