Window Glass, Flip Quarter

Sedan

Removal and Installation

1. Remove quarter trim panel (31012) . Refer to Section 01-05.

2. Remove vent roof drip side moulding. Refer to Section 01-08.

3. Remove nuts attaching quarter window opening sight shield (29726) to quarter trim panel . Remove quarter window opening sight shield from opening.

4. Remove all butyl from sheet metal flange and from window assembly if window is to be reused.

5. To install, reverse Removal procedure. Position seal on window opening flange and tighten nuts to 2.7-3.7 Nm (24-32 lb-in).
   
   
   
   
   

   Item	Part Number	Description
   1A	N621901-S2	Nut and Washer Assy
   2	97A28	Quarter Window Seal
   3	29700	Quarter Window
   A		Tighten to 2.7-3.7 Nm (24-32 Lb-In)

Convertible

Refer to Rear Quarter Window Regulator Removal and Installation.