Section 10-03: Speed Control System | 1994 Mustang Workshop Manual |
To replace speed control actuator (9A825)
, remove speed control servo
(9C735) assembly. Refer to Removal and Installation procedure
as outlined. Attach new speed control actuator
assembly to speed control servo
and install total assembly.
| Item | Part Number | Description |
|---|---|---|
| 1 | 9A758 | Accelerator Cable |
| 2 | — | Cable (Part of 9A825) |
| 3A | N610959-S2 | Bolt |
| 4 | 9A825 | Speed Control Actuator |
| A | Tighten to 4.5-6.3 Nm (40-56 Lb-In) |