Section 12-03A: Air Conditioning System—Manual A/C-Heater
1994 Mustang Workshop Manual
REMOVAL AND INSTALLATION

A/C Cyclic Switch

 

Removal

  1. Disconnect the wire harness connector from the A/C cyclic switch (19E561) .
  1. Unscrew the A/C cyclic switch from the top of the suction accumulator/drier (19C836) .
 

Installation

  1. Lubricate the O-ring seal on the suction accumulator/drier nipple with clean refrigerant oil.
  1. Screw the A/C cyclic switch on the suction accumulator/drier nipple and hand-tighten.
  1. Connect the wire connector to the A/C cyclic switch .
  1. Check the A/C cyclic switch installation for refrigerant leaks.
  1. Check the system for proper operation.