Child Restraint, Tether Attachment

Tether Anchor Hardware

• If tether anchorage hardware is required for the child safety belt anchor tether (613D74) , anchor hardware kits can be obtained at no charge from any Ford or Lincoln-Mercury dealer.
• Attachment holes at each rear seating position have been provided in all vehicles.

All vehicles built for sale in Canada include a tether anchor hardware kit for use with childs safety seats (19E535) .

• Some childs safety seats provide a tether strap which goes over the back of the vehicle seat and attaches to an anchorage in the floor or panel behind the rear seat.
• If a tether safety seat is used, place it in a rear seating position with the tether strap attached to the tether anchorage point as outlined.

 WARNING: WHEN USING ANY INFANT OR CHILD RESTRAINT SYSTEM, IT IS IMPORTANT THAT YOU FOLLOW THE INSTRUCTIONS PROVIDED BY THE MANUFACTURER CONCERNING ITS INSTALLATION AND USE. FAILURE TO FOLLOW EACH OF THE RESTRAINT MANUFACTURER'S INSTRUCTIONS CAN RESULT IN A CHILD STRIKING THE VEHICLE'S INTERIOR DURING A SUDDEN STOP OR COLLISION.

 WARNING: IT IS IMPORTANT THAT THE BOLT/ANCHOR BE SECURELY TIGHTENED TO SPECIFICATION. OTHERWISE, THE CHILDS SAFETY SEAT MAY NOT BE PROPERLY SECURED AND THE CHILD COULD BE INJURED IN CASE OF A SUDDEN STOP OR ACCIDENT.

 WARNING: CHILDREN HAVING A SEATING HEIGHT GREATER THAN 71CM (28 INCHES) SHOULD USE THE SAFETY BELTS PROVIDED WITH THE VEHICLE. HOWEVER, THE SHOULDER BELT PORTION OF THE LAP SHOULDER SAFETY BELT SHOULD NOT BE USED IF IT CONTACTS THE CHILD'S FACE, CHIN, NECK OR THROAT. IF THE SHOULDER BELT CONTACTS OR REMAINS IN FRONT OF THE CHILD'S FACE, CHIN, NECK OR THROAT, MOVE THE CHILD TO A SEAT WITH A LAP SAFETY BELT ONLY, IF AVAILABLE. FAILURE TO FOLLOW THIS PRECAUTION CAN INCREASE THE RISK OR SEVERITY OF INJURY IN THE EVENT OF A COLLISION.