Section 01-14A: Handles, Locks, Latches and Mechanisms
1994 Mustang Workshop Manual
REMOVAL AND INSTALLATION

Handle, Outside Door

 

Removal and Installation

  1. Remove front door trim panel (23942) and watershield. Refer to Section 01-05.
  1. Disconnect front door latch actuating rod (22152) from front door latch (21812) .
  1. Remove two nuts and washers retaining the door handle (22404) to the door. Remove door handle from front door (20124) .
  1. To install, reverse Removal procedure. Tighten nut to 6-8 Nm (53-71 lb-ft).




    Item Part Number Description
    1A 3621905-S36 Nut and Washer Assy (2 Req'd)
    2 22404 (RH)
    22401 (LH)     		Door Handle
    3 22152 (RH)
    22153 (LH)     		Door Latch Actuator Rod
    A Tighten to 7.6-10.4 Nm (67-92 Lb-In)