Control Switch, Door Lock

Removal and Installation

1. Carefully, with a small screwdriver, pry up outboard edge of window regulator switch plate (14524) and remove window regulator switch plate .

2. Remove two connector retaining screws from bottom of window regulator switch plate .

3. Window regulator control switch (14529) is held in place by electrical contact pins. To remove window regulator control switch , carefully pry window regulator control switch from connector with small screwdriver.

4. To install, reverse Removal procedure.

   NOTE: The window regulator control switch is keyed to the connector and can only be installed one way.

   
   
   
   
   
   

   Item	Part Number	Description
   1	23942	Front Door Trim Panel
   2	14524	LH Window Regulator Switch Plate (Convertible)
   3	17B676	LH Rear View Mirror Outside Remote Cover Housing (Convertible)
   4	14630	LH Front Window Regulator Wiring
   5	14540	Window Regulator Multiple
   6	14017	LH Front Door Lock Switch
   7	N800708-S36	Connector Screw (2 Req'd)
   8	14524	LH Window Regulator Switch Plate (Sedan)
   9	14529	Window Regulator Control Switch
   10	14630	RH Front Window Regulator Wiring
   11	14017	RH Front Door Lock Switch
   12	14524	RH Window Regulator Switch Plate