Warning Chime Module

Safety Belt Warning

When the ignition switch (11572) is turned to START or RUN, power is supplied to the safety belt warning chime (10D840) and the safety belt warning indicator lamp (10C859) .

The safety belt warning chime :

• Is grounded by a switch in the LH front safety belt buckle end (61202) .
• Will sound for approximately six seconds unless the driver's front safety belt buckle end is fastened.

Key-In-Ignition Warning

• The safety belt warning chime sounds when the driver's front door (20124) is opened while the key is in the ignition switch , and continues to sound until the key is removed or the front door is closed.
• When the key is in the ignition switch , the ignition key warning switch terminal and wire (11A128) is closed and ground is supplied to the safety belt warning chime .
• When the driver's front door is open, the courtesy lamp switch (13713) is closed and power is supplied to the safety belt warning chime .

Headlamps-On Warning

• The safety belt warning chime sounds when the driver's front door is opened while the headlamp switch (11654) is in PARK or HEAD, and continues to sound until the headlamp switch is moved to OFF or the front door is closed.
• When the headlamp switch is in PARK or HEAD, power is supplied to the safety belt warning chime .
• When the driver's front door is open, the driver's courtesy lamp switch is closed and power is supplied to the safety belt warning chime .
• Whenever selected visual warnings are displayed on the electronic instrument cluster (10849) , the instrument cluster grounds the safety belt warning chime for one second, causing it to emit a one-second beep tone to attract attention to the display.