Lamp, Dome/Map Combination

NOTE: Power to all interior lamps (13776) is provided through instrument panel Fuse 8 which is hot at all times. Ground to all of the interior lamps is provided through Circuit 57 (BK).

The dome lamp system consists of:

• Dome lamp switch (part of headlamp switch (11654) .
• Courtesy lamp switches (13713).
• Optional illuminating entry actuator (13C718) .
• Optional electronic door lock control processor (14B001) .
• Dome/map combination interior lamp .
• Circuit wiring and circuit protection.

The sedan model has a single-dome lamp bulb. The convertible model uses two miniature bulbs (13466) located in the base of the inside rear view mirror (17700) .

Power to the dome lamp portion of the dome/map combination interior lamp is provided through Circuit 53 (BK/BL) from turning on the dome lamp switch in the headlamp switch or from one of the courtesy lamp switches in the A-pillar with the front door (20124) open.

On the convertible model, the map lamp switches must be in the OFF position for the dome lamps to work with the dome lamp switch or courtesy lamp switches .

The map lamp system consists of:

• Dome/map combination lamp.
• Circuit wiring and circuit protection.

Power is provided to the map lamps through Circuit 54 (LG/Y). The map lamps are turned on by switches on the dome/map combination lamp.