Lamps, Parking/Turn Signal/Side Marker

Bulb, Parking Lamp/Turn Signal/Side Marker

1. Remove parking lamp (13200) as outlined.

2. Twist bulb socket to remove from parking lamp .

3. Pull miniature bulb (13465) out of socket and install new miniature bulb .

4. Insert socket into parking lamp and, while aligning locking tabs, twist socket to lock into parking lamp .

5. Install parking lamp as outlined.

Lamp Assembly

Removal and Installation

1. Remove three nuts retaining parking lamp assembly.

2. Pull parking lamp away from body and disconnect electrical connector.

3. To install, reverse Removal procedure. Tighten nuts to 4.4-6.4 Nm (39-57 lb-in).
   
   
   
   
   

   Item	Part Number	Description
   1	13A093	Parking Lamp Assy
   2	14290	Headlamp Dash Panel Junction Wire
   3A	N621906-S301	Nut (2 Req'd)
   4	13A093	Headlamp Adjustment Screw and Nut Assy
   5	13008	Headlamp Bulb
   A		Tighten to 4.4-6.4 Nm (39-57 Lb-In)