Lamp and Switch, Fog

The fog lamps (15200) consist of:

• Two fog lamp assemblies.
• A fog lamp switch (15A214) in the console.
• Circuit wiring and circuit protection.

Power to the fog lamp switch is provided through Circuit 13 (R/BK) from the LO terminal on the turn signal and windshield wiper switch (13K359) . This allows the fog lamps to only be operated with the LO beam headlamps (13008) .

• With the fog lamp switch on, power is supplied through Circuit 275 (Y) to the coil side of the fog lamp relay. The coil pulls the normally open contacts closed. This provides power from the DRL/FOG/HORNS fuse in the power distribution box and harness (14516) in the engine compartment through Circuit 477 (LB/BK) and the relay to Circuit 478 (T/O) to the fog lamps . Ground is provided to the fog lamp relay and the fog lamps through Circuit 57 (BK).
• With the fog lamp switch on, power is also supplied to the fog lamp ON indicator in the fog lamp switch . Ground is provided to this indicator through Circuit 57 (BK).
• With the parking lamp (13200) or headlamps on, the fog lamp switch illumination bulb is lit. Refer to Section 13-00.