Battery Tray

Removal

1. Remove battery (10653) from vehicle as outlined.

2. Remove retaining bolts, screws and washers from battery tray (10732) .

3. Remove battery tray from vehicle.

Installation

1. Position battery tray to front fender apron (16054) in engine compartment.

2. Install retaining bolts and washers. Tighten each to 9-14 Nm (7-10 lb-ft).

3. Install battery in battery tray as outlined.

4. Tighten battery mounting clamp bolt (10756) to 7-10 Nm (6-7 lb-ft).
   
   
   
   
   

   Item	Part Number	Description
   1A	N803471-S55	Bolt
   2	10718	Battery Hold Down Clamp
   3	10732	Battery Tray
   4B	N606676-S56	Bolt (4 Req'd)
   5	16055	Front Fender Apron
   A		Tighten to 7-10 Nm (6-7 Lb-Ft)
   B		Tighten to 9-14 Nm (7-10 Lb-Ft)