Instrument Cluster Printed Circuit

Removal

1. Disconnect battery ground cable (14301).

2. Remove instrument cluster (10849) as outlined.

3. Remove lamp instrument panel lamp socket and bulbs (13B765).

4. Turn instrument cluster so instrument cluster main lens (10887) is upward. Remove retaining screws from instrument cluster main lens and instrument cluster mask (10890) and disconnect.

5. Remove fuel gauge (9305), oil pressure gauge (9273) , instrument cluster temperature gauge (10883) / voltage indicator gauge (10A835) , speedometer (17255) and tachometer (17360) . Retain for assembly.

6. Remove and discard all snap-in connector clips.

7. Remove instrument cluster printed circuit (10K843).

Installation

1. Position the instrument cluster printed circuit over the locating pins and affix to locating pins in instrument cluster back plate (10848).

2. Install instrument panel lamp socket and bulbs.

3. Install new snap-in connector clips.

4. Install speedometer/ tachometer , fuel gauge , oil pressure gauge and instrument cluster temperature gauge / voltage indicator gauge in instrument cluster back plate .

5. Install instrument cluster mask, instrument cluster main lens and retaining screws.

6. Install instrument cluster.

7. Connect battery ground cable.