Section 12-02: Heating and Defrosting
1994 Mustang Workshop Manual
REMOVAL AND INSTALLATION

Heater Air Plenum Chamber and Duct

 

Removal and Installation

  1. Remove instrument panel (04320) and lay it on front seat. Refer to Section 01-12.
  1. Remove retaining screw for plenum chamber to instrument panel reinforcements.
  1. Remove plenum to defroster nozzle retaining screw.
  1. Remove plenum chamber to instrument panel retaining screws.
  1. Remove heater air plenum chamber (18471) from vehicle.
  1. To install, reverse Removal procedures.