Flasher Unit

Turn Signal Flasher

Removal and Installation

The turn signal indicator flasher is located on the instrument panel reinforcement flange above the fuse junction panel (14A067) .

To remove this type of indicator flasher , rotate the indicator flasher 90 degrees counterclockwise to disengage it from the mounting slot, and disconnect the wiring plug.

To install, lock the indicator flasher in place by inserting the tab in the slot and rotating 90 degrees clockwise. Connect the wiring plug.

Hazard Flasher

Removal and Installation

Hazard indicator flasher unit is mounted on the rear side of the fuse junction panel .

To remove hazard indicator flasher , pull straight out.

When installing a new indicator flasher , line up the metal terminals with slots in the fuse junction panel , then press the indicator flasher firmly into place.