High Beam/Flash-to-Pass Switch

The turn signal lever also operates the headlamp dimmer switch (13A024) and the flash-to-pass feature.

• High beam is selected by pushing the turn signal lever away from the driver to the stop.
• Release of the lever will maintain high beams.
• Low beam is selected by pulling the turn signal lever toward the driver from the high beam position.
• Release of the lever will maintain low beams.
• To operate the flash-to-pass feature, pull the lever gently toward the driver.
• When the lever is released, it will return to the LO beam position.
• If driving without headlamp bulbs (13007) ON, use of the flash-to-pass feature will turn on the high beams until the turn signal lever is released.
• If the headlamp bulbs are turned ON, the low and high beams will be on until the lever is released.

NOTE: Excessive force used to hold the turn signal lever in the flash-to-pass function followed by quick release may result in incorrect headlamp dimmer selection of high beam. The driver must be cautioned to avoid this condition.