Section 11-04: Steering Column
1994 Mustang Workshop Manual
REMOVAL AND INSTALLATION

Turn Signal and Windshield Wiper Switch

 

Removal

  1. Remove the upper steering column shroud (3530) and lower steering column shroud by removing the retaining screws.
  1. Disconnect turn signal and windshield wiper switch connectors.
  1. Remove turn signal and windshield wiper switch retaining screws and remove turn signal and windshield wiper switch (13K359) .
 

Installation

  1. Position turn signal and windshield wiper switch and install retaining screws.
  1. Connect electrical connectors.
  1. Install lower steering column shroud and upper steering column shroud .