Section 11-02: Steering System, Power
1994 Mustang Workshop Manual
SPECIFICATIONS

Specifications

STEERING SYSTEM SPECIFICATIONS
Description Specification
Gear Ratio 17.1 at Stops, 15:1 Constant
Number of Turns 2.38
Pinion, Rack Lubricant Capacity 23-27 Grams
Power Steering Fluid Capacity (Including Steering Pump) 2.5 Pints
Steering Gear Grease (C3AZ-19578-A) ESW-M1C87-A
Seal Lubricant (Cavity under Dust Seal) (D0AZ-19584-A) ESB-M1C93-A
Premium Power Steering Fluid E6AZ-19582-AA (ESW-M2C33-F)
Effort Required to Initiate Proper Input Shaft Rotation (Power Cylinder drained and gear removed from Vehicle) 0.79-2.71 Nm (7-24 Lb-In)
Tie Rod Articulation Effort (On Pull Scale) 2-10 lb.
Tie Rod Outer End Lubricant (D7AZ-19590-A) ESA-M1C172-A



TORQUE SPECIFICATIONS
Description N-m Lb-Ft
Pressure Hose Fitting (At Pump) 14-20 10-15
Gear-to-Crossmember Mounting Bolt Nut 59.5-80.5 43.8-59.3
Tie Rod End-to-Spindle Arm Nut 48-63 35-47
Tie Rod End-to-Tie Rod Jam Nut 48-68 35-50
Steering Flex Coupling Bolt 28-40 20-30
Bellows Clamp Screw 2.3-3.4 20-30 (Lb-In)
Yoke Plug 5-5.6 45-50 (Lb-In)
Yoke Plug Locknut 60-89 44-66
External Transfer Tubes (Right Turn and Left Turn Lines) 20-34 15-25
Hose Fittings at Gear 27-34 20-25
Pinion Bearing Locknut 41-54 30-40
Pinion Bearing Cap 54-68 40-50
Tie Rod Ball Socket Assy to Rack 75-88 55-65
Power Steering Bracket Bolt 79-95 58-70
Lower Power Steering Bolt 40-55 30-40
Pivot Bolt 40-62 30-45
Front Bolts to Support Bracket 40-62 30-45
Support Bracket to Engine 40-62 30-45
Support Bracket to Water Pump Housing 40-62 30-45
Pump to Bracket 40-62 30-45
Return Hose to Pump (Hose Clamp) 1.4-2.7 12-24 (Lb-In)
Pump Bracket to Rear Support with A/C 24-32 18-24
Pump Bracket to Rear Support without A/C 40-62 30-45
Rear Support to Engine Head 40-62 30-45
Quick Connect Power Steering Fitting 27-34 20-25
Outlet Fitting to Reservoir and Valve Cover 34-46 25-34