Section 06-09: Brake System, Anti-Lock
1994 Mustang Workshop Manual
REMOVAL AND INSTALLATION

Control Module, Anti-Lock Brake

 

Removal

  1. Remove hydraulic control unit as outlined.
  1. Remove TORX® head screw from black plastic cover. Remove cover.
  1. Remove 15-pin connector.
  1. Remove 4-pin connector.
  1. Remove six TORX® head bolts securing anti-lock brake control module (2B373) to hydraulic control unit. Remove anti-lock brake control module by pulling straight up over ground post.



 

Installation

  1. Position anti-lock brake control module over ground post.
  1. Install six TORX® bolts securing anti-lock brake control module to the hydraulic control unit.
  1. Install 4-pin connector and 15-pin connector.
  1. Install cover and TORX® headed screw.
  1. Install hydraulic control unit as outlined.