Description

The Traction-Lok axle assembly, except for the differential case and its internal components, is identical to the conventional axle.

The Traction-Lok differential has the following characteristics:

• Employs two sets of differential clutch packs (4947) to control differential action.
• Differential side gear mounting distance is controlled by differential clutch packs .
• Differential clutch packs consist of seven plates (four steel, three friction) and one rear axle differential clutch shim (4A324) .
• Differential clutch packs are installed on differential side gears (4236) and housed in the differential case (4204) .
• One-piece differential clutch spring (4214) applies initial force to the differential clutch packs.
• Friction plates are dogged to differential case .
• Steel plates are splined to differential side gear .
• Differential side gears are splined to axle shafts (4234) .