Section 03-01B: Engine, 5.0L HO and 5.0L Cobra
1994 Mustang Workshop Manual
IN-VEHICLE SERVICE

Oil Pump

 

Removal

  1. Remove the oil pan (6675) and related parts as outlined.
  1. Remove the oil pump screen cover and tube (6622) .
  1. Remove the oil pump retaining bolts. Remove the oil pump (6600) and oil pump intermediate shaft (6A618) .
 

Installation

  1. Prime the oil pump by filling either the inlet or outlet port with engine oil. Rotate the pump shaft to distribute the oil within the pump body.
  1. Position the oil pump intermediate shaft into the distributor socket. With the oil pump intermediate shaft firmly seated in the distributor socket, the stop on the oil pump intermediate shaft should touch the roof of the crankcase. Remove the oil pump intermediate shaft and position the stop as necessary. Do not attempt to force the oil pump into position if it will not seat readily. The driveshaft hex may be misaligned with the distributor shaft. To align, rotate the oil pump intermediate shaft into a new position.
  1. With the stop properly positioned, insert the oil pump intermediate shaft into the oil pump . Install the oil pump and oil pump intermediate shaft as an assembly.
  1. Tighten the oil pump retaining bolts to 30-43 Nm (22-32 lb-ft).
  1. Install the oil pan and related parts as outlined.