Oil Level Indicator Tube

Removal

1. Remove oil level indicator (6750) from oil level indicator tube (6754) .

2. Remove oil level indicator tube retaining nut from LH exhaust manifold stud.

3. Remove oil level indicator tube from cylinder block (6010) .

Installation

NOTE: Using solvent, clean oil level indicator tube and cylinder block sealing surfaces before applying silicone sealer.

1. Apply a 3mm (1/8 inch) bead of Silicone Rubber D6AZ-19562-BA or equivalent meeting Ford specifications ESB-M4G92-A and ESE-M4G-195-A to oil level indicator tube where oil level indicator tube mates with cylinder block .

2. Install oil level indicator tube into cylinder block .

3. Install oil level indicator tube bracket onto LH intake manifold stud. Install and tighten oil level indicator tube retaining nut to 20-30 Nm (15-22 lb-ft).

4. Install oil level indicator into oil level indicator tube .