Section 03-01A: Engine, 3.8L
1994 Mustang Workshop Manual
IN VEHICLE SERVICE

Oil Pump

 

Removal

  1. If necessary, remove oil bypass filter (6714) .
  1. Remove oil pump and filter body to engine front cover retaining bolts and remove oil pump and filter body (6603) from engine front cover (6019) .
  1. Inspect O-ring for distortion and wear. Replace if necessary.
 

Installation

  1. Position oil pump and filter body on engine front cover and install retaining bolts.
  1. Tighten four smaller engine front cover retaining bolts to 25-30 Nm (18-22 lb-ft). Tighten two larger retaining bolts to 40-55 Nm (30-40 lb-ft).
  1. If removed, reinstall oil bypass filter.