Windshield Washer Pump and Seal Assembly

Removal

1. Remove windshield washer reservoir (17618) from vehicle as outlined. Disconnect electrical connector and windshield washer hose (17A605) .

2. Using a small-blade screwdriver, pry out windshield washer pump (17664) , being careful not to damage plastic housing.

3. Remove one-piece seal/filter and inspect for damage or debris.

Installation

1. Insert seal.

2. Lubricate inside diameter of seal with soapy solution and insert windshield washer pump into windshield washer reservoir cavity until it is firmly seated in the seal.

3. Connect electrical plugs and windshield washer hose and replace windshield washer reservoir in vehicle.

    CAUTION: Do not operate windshield washer pump until fluid is added to windshield washer reservoir .

4. Fill windshield washer reservoir slowly (otherwise air will be trapped in windshield washer reservoir causing it to overflow).

5. Operate washer system and check for leaks.