Door Glass Run Retainer

Front

Removal and Installation

Refer to illustration following Step 5.

1. Remove the front door trim panel finish panel (23712) and watershield. Refer to Section 01-05.

2. With the front door window glass (21410) in the full-up position, remove the glass run from the front door glass run front retainer (21572) .

3. Remove the two nuts and washers attaching the front door glass run front retainer to the inner door panel.

4. Disengage the front door glass run front retainer from the lower leg of the door frame and remove the retainer. Use care during retainer removal to prevent pinching the front door glass hinge side run (21546) .

5. To install, reverse Removal procedure. Tighten nuts to 10.2-13.8 Nm (8-10 lb-ft).
   
   
   
   
   

   Item	Part Number	Description
   1	21572 RH 21573 LH	Front Door Glass Run Front Retainer
   2	23200 RH 23201 LH	Front Door Power Window Regulator
   3A	N800251-S36	Nut and Washer (4 Req'd)
   4	21546	Front Door Glass Hinge Side Run
   5	23342	Window Regulator Handle (Electrical)
   6A	N621906-S36	Nut and Washer (2 Req'd)
   7	W525172-S	Rivet (4 Req'd)
   8	23200 RH 23201 LH	(Manual) Power Window Regulator, Front Door
   9	23370	Window Regulator Handle Plate
   10	23342	Window Regulator Handle (Manual)
   A		Tighten to 10.2-13.8 Nm (91-122 Lb-In)