Window Regulator Control Switch

Removal and Installation

1. Remove window regulator switch plate (14524) by carefully prying up and out of front door trim panel (23942) .

2. Remove two connector retaining screws from bottom of window regulator switch plate .

3. The window regulator control switch (14529) is held in place by electrical contact pins. To remove window regulator control switch , carefully pry window regulator control switch from connector with a small screwdriver.

   NOTE: The window regulator control switch is keyed to connector and can only be installed one way.

4. To install, reverse Removal procedure.
   
   
   
   
   

   Item	Part Number	Description
   1	23942	Front Door Trim Panel
   2	14524	Window Regulator Switch Plate (Convertible)
   3	17B676	Outside Rear View Mirror Control
   4	14631	Front Window Regulator Wiring
   5	14529	Window Regulator Control Switch (Convertible)
   6	14017	Front Door Lock Switch
   7	N800708-S36	Connector Screw (2 Req'd)
   8	14524	Window Regulator Switch Plate (Sedan)
   9	14529	Window Regulator Control Switch (Sedan)
   10	14630	Front Window Regulator Wiring
   11	14017	Front Door Lock Switch
   12	14A563	Window Regulator Switch Plate