Remove the air cleaner assembly. Refer to Section 03-12.
Using a suitable tool, push the accelerator cable nylon bushing out of the
accelerator pedal and shaft arm.
Remove the accelerator cable retainer (9E728) from the accelerator cable. The accelerator cable retainer
is located inside the vehicle where the housing passes
through the dash panel (01610)
into the passenger compartment.
Disconnect the accelerator cable
at the throttle body throttle lever by removing the
core wire end from the throttle body cam slot.
Remove the screw retaining accelerator cable
to accelerator cable bracket (9723)
.
Remove screws retaining the accelerator cable
to the dash panel
and remove accelerator cable
.
To install, reverse Removal procedure and ensure accelerator cable retainer
is pushed 6.35mm (1/4 inch) onto accelerator cable
. On 3.8L be sure accelerator cable
moves freely.