- Accelerator Pedal and Shaft are Hard to Push Down or Have a
Rough/Raspy or Sticky Feel
|
- Be sure that the disconnected end of the accelerator cable
or its accelerator retracting spring
does not come into contact with any of the surrounding
parts.
- Operate the accelerator pedal and shaft
by foot.
- If accelerator cable
operation is smooth, accelerator cable is not damaged.
Refer to PC/ED Manual, OBD I (5.0L) or OBD II (3.8L) for other checks.
- If the condition recurs (being sure disconnected end of accelerator cable
has not come into contact with anything), check the accelerator pedal and shaft
for free operation.
|
- Replace accelerator cable
.
|