The throttle is controlled by an accelerator cable (9A758)
and accelerator pedal and shaft (9725)
assembly. The following should be noted when servicing
this system:
The accelerator pedal and shaft
should travel smoothly from the idle to wide-open
throttle positions.
Hesitation on return and/or prevention of return to the idle position
must not occur.
Surrounding components such as wiring, hoses, sound insulator and floor
covering must not contact the sliding inner member of the accelerator cable
or the accelerator pedal and shaft
assembly.
The throttle assembly is adjustable for free
play and wide-open throttle position as outlined.