Flywheel Face Runout

Install Dial Indicator TOOL-4201-C or equivalent so that the indicator point contacts the flywheel (6375) face. Turn the flywheel , making sure to hold it in the full forward or rearward position so that crankshaft end play will not be indicated as flywheel runout.

If the clutch face runout exceeds specification, remove the flywheel and check for burrs between the flywheel and face of the crankshaft mounting flange. If no burrs exist, check the runout of the crankshaft mounting flange. Replace the flywheel or machine the crankshaft flywheel mounting face sufficiently to correct the surface if the mounting flange runout exceeds the specification of 0.2mm (0.008 inch).