Place shift lever in OVERDRIVE. Raise vehicle. Refer to Section 00-02.
Remove transmission shift cable and bracket retaining bolts from shifter
mounted bracket. Disconnect transmission shift cable and bracket (7E395)
from shift lever ball stud.
Remove transmission shift cable and bracket retaining bolts from
transmission mounted bracket.
Remove transmission shift cable and bracket retaining nut from transmission manual control lever (7A256)
and remove transmission shift cable and bracket
.
Installation
Install transmission shift cable and bracket
to shifter mounted bracket. Tighten screws to 3.4-4.8 Nm
(30-42 lb-in). Connect transmission shift cable and bracket
to shift control selector lever and housing (7210)
.
Install shift cable mounted bracket to automatic transmission. Tighten nuts
to 25.5-34.5 Nm (19-25
lb-ft).
Place the transmission manual control lever
in OVERDRIVE as outlined in Adjustments. Apply a 1.4 kg
(3 lb) rearward force to the shifter lever, which should be in OVERDRIVE.
Connect transmission shift cable and bracket
to transmission manual control lever
. Tighten retaining nut to 17-23 Nm
(13-17 lb-ft).