Section 07-03: Transmission, Manual—T5OD
1994 Mustang Workshop Manual
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES

Bearing Retainer, Front

 

Main Shaft

Disassembly

  1. Remove bearing race and end play shim.
  1. Using a screwdriver, carefully pry input shaft and extension housing seal (7052) from main drive gear bearing retainer (7050) .



 

Assembly

  1. Using Differential Side Bearing Replacer T77F-4220-A, install new input shaft and extension housing seal .

    NOTE: If input shaft and extension housing seal is being replaced as a part of a transmission overhaul, do not install the end play shim.

  1. Install end play shim and bearing race.