Converter and Oil Cooler

When internal wear or damage has occurred in the transmission, metal particles, clutch plate material or band material may have been carried into the torque converter (7902) and transmission oil cooler (7A095). These contaminants are a major cause of recurring transmission troubles and must be removed from the system before the transmission is put back into service.

Whenever a transmission has been disassembled to replace worn or damaged parts or because the valve body sticks from foreign material, the torque converter and transmission oil cooler must be cleaned by using a mechanically agitated cleaner, such as Rotunda Torque Converter and Oil Cooler Cleaner 014-00028 or equivalent.

Flush the torque converter of the remaining solvent using this procedure:

1. Thoroughly drain the remaining solvent through the converter housing access plug (7N171).

2. Add 1.9 liter (2 qt) of clean transmission fluid to the torque converter. Agitate by hand.

3. Thoroughly drain the solution through the converter housing access plug.