Section 04-02: Suspension and Wheel Hubs, Rear
1994 Mustang Workshop Manual
REMOVAL AND INSTALLATION

Bushing, Axle Housing-to-Upper Arm

SPECIAL SERVICE TOOL(S) REQUIRED
Description Tool Number
Bushing Remover and Installer Set T78P-5638-A

 

Removal

  1. Remove rear suspension arm and bushing (5500) as outlined.
  1. Place the upper arm axle bushing remover tool in position and remove the rear suspension arm bushing (5A638) assembly.



 

Installation

  1. Using the installer tool, install the bushing assembly into the rear suspension arm bushing ear of the rear axle housing (4010) .



  1. Install rear suspension arm and bushing as outlined.