Section 03-06: Starting System
1994 Mustang Workshop Manual
REMOVAL AND INSTALLATION

Starter Relay

 

Removal and Installation

NOTE: When the battery (10653) has been disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control module (PCM) (12A650) relearns its adaptive strategy. The vehicle may need to be driven 10 miles or more to relearn the strategy.

  1. Open hood (16612) .
  1. Disconnect battery ground cable (14301) .
  1. Remove engine compartment fuse box cover.
  1. Remove starter relay from engine compartment fuse box.
  1. To install, reverse Removal procedure. Align starter relay terminals with engine compartment fuse box terminals.