Section 01-05: Trim, Interior
1994 Mustang Workshop Manual
CLEANING AND INSPECTION

Stain Cleaning

 CAUTION: Care should be used in application of the spot lifter to prevent it from contacting vinyl trim.

 

Grease, Oil, Tar, Adhesive, Crayon and Lipstick

  1. If the stain is still visible after the spot cleaning procedure, blot the soiled area with a clean cotton cloth saturated with Extra-Strength Spot and Stain Remover B7A-19521-AA (ESR-M5B 197-A) or equivalent.
  1. Rub in a circular motion while continuously exposing clean portion of cloth.
  1. Gradually widen area of application onto edges of design, pleat, or biscuit.
  1. Repeat Steps 1, 2 and 3 as necessary.
  1. Wipe cleaned area with clean damp cloth to remove any residual cleaner.
 

Dirt, Dry Soil, Food and Beverages

  1. Apply Rosenthal or Bissell, or an equivalent upholstery cleaner with clean brush or sponge as directed on the instructions furnished with the container.
  1. Rub in a circular motion until stain is removed.
  1. Gradually widen area of application to edges of design, pleat, or biscuit.
  1. Repeat Steps 1, 2 and 3 as necessary.
  1. Rub cleaned area with a damp cloth to absorb residual cleaner.
  1. Allow to dry at room temperature.