Section 01-02: Body Panels, Front End
1994 Mustang Workshop Manual
REMOVAL AND INSTALLATION

Fog Lamp Bracket

 

Mustang GT

Removal and Installation

  1. Disconnect wiring to LH and RH fog lamps (15200) .
  1. Remove four retaining screws (two each side) retaining lamp mounting bracket to front bumper (17757) (two from backside of front bumper and two through fog lamp opening in front bumper cover (17D957) ).
  1. Remove two nuts (one each fog lamp ) retaining fog lamp and mounting bracket. Pull fog lamps out through rear of front bumper cover .
  1. Carefully pull down on bottom edge of front bumper cover and remove mounting brackets and reinforcement.
  1. To install, reverse Removal procedure.