Section 12-03C: Compressor and Clutch—6P148 | 1993 Mustang Workshop Manual |
| Description | Specification |
|---|---|
| Type 6P148 (6 Cylinder) | Swashplate, 3 Double Acting Pistons—Axial |
| Displacement | 148 cc (9.03 CID) |
| Rotation | Clockwise |
| Rotational Torque
(Maximum, Manifold Removed) |
10 Nm (7 Lb-Ft) |
| Refrigerant Oil
Type |
ESH-M2C31-A2 |
| Capacity (System Total) | 300 ml (10 Fluid Ounces) |
| Part Number | E73Z-19577-A Motorcraft YN-9 |
| Magnetic Clutch
Air Gap Between Pulley and Hub |
0.021-0.036 Inch |
| Current Draw | 4.67 Amps @ 12.8 Volts |
| Run-Out (Maximum) | 0.02 Inch—Radial or Axial |
| Description | Nm | Lb-Ft | Lb-In |
|---|---|---|---|
| Manifold Retaining Bolts | 18-23 | 14-16 | |
| Suction Manifold Retaining Bolts | 28-36 | 21-26 | |
| Discharge Manifold Retaining Bolts | 20-27 | 15-19 | |
| Suction Line Fittings | 28-36 | 21-26 | |
| Discharge Line Fittings | 20-27 | 15-19 | |
| Hub Retaining Nut | 13-20 | 10-14 | |
| Front Head-To-Cylinder Assembly Head Bolts | 24.5-26.5 | 18-19 | |
| Rear Head-To-Cylinder Assembly Head Bolts | 24.5-26.5 | 18.19 | |
| Hose Manifold to Compressor | 18-23 | 14-16 | |
| Clutch Hub Nut | 13-20 | 10-14 | |
| Compressor Head Bolts | 24.5-26.5 | 18-19 | |
| Suction Line to Manifold | 28-36 | 21-26 | |
| Discharge Line to Manifold | 20-27 | 15-19 |