Section 12-03C: Compressor and Clutch—6P148
1993 Mustang Workshop Manual
REMOVAL AND INSTALLATION

Clutch Field Coil

 

Removal

  1. Remove the clutch hub and pulley.
  1. Remove the snap ring retaining the clutch field coil on the front of the compressor.
  1. Pull the field coil from the front of the compressor.
 

Installation

  1. Position the clutch field coil to the compressor, engaging the locator pin on the compressor head with the hole in the clutch field coil mounting plate.
  1. Install the snap ring to retain the clutch field coil on the compressor with the bevel side of snap ring out.
  1. Install the pulley and hub on the compressor as outlined. DO NOT USE AIR TOOLS.