Section 12-03B: Compressor and Clutch—10P15C | 1993 Mustang Workshop Manual |
NOTE: Drive belt tension is maintained by an automatic tensioner. No adjustment is required.
| Description | Specification |
|---|---|
| Type 10P15C (10 Cylinder) | Swashplate, 5 Double Acting
Pistons—Axial |
| Displacement | 153cc (9.33 CID) |
| Rotation | Clockwise |
| Rotational Torque
(Maximum Manifold Removed) |
10 Nm (7 lb-ft) |
| Refrigerant Oil
Type |
ESH-M2C31-A2 |
| System Capacity | 8 Fluid Ounces |
| Part Number | E73Z-19577-A
Motorcraft YN-9 |
| Magnetic Clutch
Air Gap Between Pulley and Hub |
0.021-0.036 inch |
| Current Draw | 4.67 Amps @ 12.8 Volts |
| Run-Out (Maximum) | 0.02 Inch Radial or Axial |
| Description | Nm | Lb-Ft | Lb-In |
|---|---|---|---|
| Torque Limits
Manifold to Compressor Bolts |
18-23 | 14-16 | |
| Clutch Hub Nut | 13-20 | 10-14 | |
| Compressor Cylinder Bolts | 24.5-26.5 | 18-19 | |
| Suction Hose to Manifold | 28-36 | 21-26 | |
| Compressor to Mounting Bracket Bolts | 40-55 | 30-40 | |
| Compressor Mounting Bracket to Engine | 40-55 | 30-40 | |
| Cylinder Head Bolts (Step 1) | 16 | 12 | |
| Cylinder Head Bolts (Step 2) | 20 | 15 | |
| Cylinder Head Bolts (Step 3) | 25 | 19 |