Section 12-03B: Compressor and Clutch—10P15C
1993 Mustang Workshop Manual
REMOVAL AND INSTALLATION

Clutch Field Coil

 

Removal

  1. Remove clutch hub and pulley.
  1. Remove snap ring retaining clutch field coil on the front of compressor.
  1. Pull field coil from front of the compressor.
 

Installation

  1. Position clutch field to compressor, engaging locator pin on compressor head with the hole in the clutch field coil mounting plate.
  1. Install snap ring retaining clutch field coil on the compressor with bevel side of snap ring out.
  1. Install pulley and hub on compressor and check air gap. Adjust as necessary.