Compressor Manifold Leak Test

Tools Required:

• Rotunda Leak Detector 055-00015

1. Tighten manifold retaining bolts to 18-23 Nm (14-16 lb-ft).

2. Add refrigerant and leak test manifold O-ring seals using Rotunda Leak Detector 055-00015 or equivalent.

3. If no leaks are found during leak test, manifold O-ring seals are good.

4. If a leak is found at manifold and manifold bolts are tightened to 18-23 Nm (14-16 lb-ft), install new manifold O-ring seals following procedure under Suction and Discharge Manifold Removal and Installation, then repeat leak test procedure.