Remove the dust cover (boot) and stow in protective case in the luggage
compartment.
Actuate the folding top control switch located on the instrument panel
immediately before the No. 1 bow dowel pins enter their respective striker
plates.
Release the control switch and open header clamps. Then, continue to raise
the top until No. 1 bow rests properly on windshield header.
NOTE: Under certain conditions it may be necessary to grasp the side rail
directly above the door glass and pull down while clamping No. 1 bow at the
header.
Close both header clamps making certain that J-hooks are fully engaged with
their respective catches.