Section 01-10B: Seat, Articulated Sport
1993 Mustang Workshop Manual
REMOVAL AND INSTALLATION

Cushion Pad Support Assembly, Front Seat

 

Removal and Installation

  1. Remove the seat and track assembly. Refer to Section 01-10A. Place the seat on a clean surface.
  1. Remove the seat cushion trim cover and pad assembly as outlined.
  1. Disengage the springs retaining the pad support to the cushion frame. Remove the pad support.
  1. To install, position the pad support assembly into the retainers located along the front edge of the seat cushion.
  1. Using a tool with a hooked end, install the springs used to retain the rear portion of the pad support assembly to the cushion frame.
  1. Install the seat cushion pad and trim cover as outlined.
  1. Secure the seat tracks to the seat cushion frame. Tighten the retaining bolts to 12-24 Nm (9-17 lb-ft).
  1. Install the seat and track assembly. Refer to Section 01-10A.
  1. Check the seat tracks and safety belts for proper operation.