Section 01-10A: Seats and Tracks | 1993 Mustang Workshop Manual |
Vertical adjustment for the second seat back latch striker can be made by loosening the two retaining screws, and moving the striker plate up or down to obtain proper engagement to the seat back latch. Tighten screws to 8-14 Nm (6-10 lb-ft).
Lateral adjustment of the seat back latch can be made by removing the rear seat back latch trim cover and carpet. Loosen the two latch retaining screws and move the latch right or left, as required, to properly engage the latch striker. Tighten screws to 2-2.5 Nm (18-22 lb-in).