Rear Seat Back Pivot Brackets

Outboard Pivot

Removal and Installation

1. Remove rear seat back as outlined.

2. Remove three screws retaining the pivot bracket to floor and remove bracket.

3. To install, reverse Removal procedure. Tighten bracket retaining screws to 5.4-8.1 Nm (4-6 lb-ft).

Center Pivot (Split Back Seat)

Removal and Installation

1. Remove rear seat back as outlined.

2. Remove two nuts retaining the pivot bracket to floor and remove bracket.

3. To install, reverse Removal procedure. Tighten bracket retaining nuts to 8.1-14.9 Nm (6-11 lb-ft).
   
   
   
   
   

   Item	Part Number	Description
   1	60514	Pivot Bracket
   2A	55876-S36X	Screw (3 Req'd Each Side)
   3	613B90	Center Pivot Bracket
   4	62320	Spacer
   5B	45334-S2	Nut (2 Req'd)
   A		Tighten to 5.4-8.1 Nm (4-6 Lb-Ft)
   B		Tighten to 8.1-14.9 Nm (6-11 Lb-Ft)