Section 01-10A: Seats and Tracks
1993 Mustang Workshop Manual
REMOVAL AND INSTALLATION

Seat Back, Rear

 

Removal

  1. Fold seat back down.
  1. Carefully pry up five push pins to disengage carpet from seat back.
  1. Remove three screws retaining folding arm to seat back.
  1. Move seat outboard to disengage from center pivot and remove seat.
  1. Remove seat trim as outlined.
 

Installation

  1. Position seat back in vehicle and move inboard to engage in center pivot bracket.
  1. Install three screws retaining folding arm to seat back. Tighten to 4-5 Nm (35-44 lb-in).
  1. Position carpet on seat back and engage five push pins.
  1. Raise seat back to latched position. Adjust latch and striker as outlined, if necessary.