Seat Cushion, Rear

Removal

1. Apply knee pressure to the lower front portion of rear seat cushion. Push rearward to disengage seat cushion from tubular supports.

2. Remove one of the rear quarter armrests, if so equipped, to remove the seat back assembly. Refer to Section 01-05.

3. Remove the seat back lower retaining screws.

4. Grasp the seat back assembly at the bottom and lift up to disengage the hanger wire from the retainer brackets.

5. Remove the seat back assembly from the vehicle.
   
   
   
   
   

   Item	Part Number	Description
   1	—	Support Rear Seat
   2	60080	Seat Cushion Assy
   3	611A720	Safety Belt Assy
   4A	389370-S100	Bolt
   5A	N800937-S100	Nut (2 Req'd)
   A		Tighten to 30-43 Nm (23-32 Lb-Ft)

Installation

1. Position the seat back assembly into the vehicle so that the hanger wire is fully engaged with the retaining brackets.

2. Install the seat back lower retaining screws and tighten securely.

3. Position the seat cushion assembly into the vehicle.

4. Apply knee pressure to the lower portion of seat cushion assembly. Push rearward and down to lock the seat cushion into position.

5. Install the rear quarter armrest, if removed. Refer to Section 01-05.

6. Check rear seat cushion to ensure it is secured to tubular support.