Lamp, Dome and Map

Lamp Assembly and Bulb Replacement

To replace the dome lamp bulb, insert a thin flat-blade screwdriver in the slot between the rocker switch buttons to release the locking tabs. Remove lens from lamp body by swinging down at rear and pulling rearward. Pull the wedge base bulb directly out of its socket.

To replace the map lamp bulbs, remove the three screws that retain the lamp assembly to its mounting surface. Lower the lamp assembly and replace the bulbs from rear of lamp by inserting a thin flat-blade screwdriver into the slot behind bulbs and push them out.

With Moon Roof

To replace the bulb, remove lamp assembly by pulling down from headlining. Using long-nose pliers, slide bulb out of its socket. Be careful not to break bulb. Wear eye protection.